Last updated: 02-December-2010

- Version: 8.02.020
- Build: 8.2.40.20
- This build was done on ati_pcie_integration_exerciser_gen3_mriov
- FPGA Versions            : 2.84
- Firmware version         : 0.8
- Platform Version         : 1.09.0005 (Release)
- Package GUID             : 22C82A09-2921-4d79-90F2-1E970F7C5200
- AgtUSBManager            : Version 3.7
- Update GUI               : Version 3.0

_______________________________________________________________________________

Features/Enhancements
---------------------

  - API help updated  
  - MRIOV Support (Data Link Layer up, Packet Generation - Function 0)
  - Packet Generation (all functions), Send Immediate, Behavior Memory
  - Flow Control, IOV Function Status, HW Status, TCL scripts to open Exercisers and to send packets , configuration save & load
  - Data Memory write & compare
  - Decoder
  - Configuration Space
  - Protocol Checker (Physical)
  - Error Insertion
  - PCIe Port
  - Protocol Checker (All)
  - PCIe Spec revision 0.9 support
  - Independent Start/Stop of block transfers from individual functions.
  - Interrupts
  - Config Space Function Table
  - Performance Counters/Real Time Statistics (using API only)

_______________________________________________________________________________

Known Limitations\Issues
------------------------
1. If you have USB Device(s) (U4305A) attached to your system but only one or none of them 
  receives a valid module number (module numbers on the U4305A devices are 10001, 10002 etc.), 
  this might be due to one of the following reasons:
  a) The USB Device(s) has been plugged in for the first time after rebooting the host 
     controller PC and another USB Device or module was already locked by a session.
     Please close all existing sessions and update the module numbers. Now run
     Start->Programs->Agilent SPT->Tools->Diagnostics
     and hit the button 'Update Module Numbers'. 
  b) If you are working on a system with Windows XP SP2 this might be a problem with 
     the loopback addresses. This has been fixed by Microsoft in the patch KB893066.
     You can download the patch at the Microsoft site http://www.microsoft.com/downloads/

2. If your USB controller supports USB2.0 make sure that you use the delivered (or corresponding) USB2.0 cable only.
3. Release 7.3(E2960B Gen2 Exericser) & Release 8.x(U4305A Gen3 Exerciser) can not exist on same machine.
4. Power Management states L0s, L1, L2 are not supported
5. Loopback, Disabled, Hot Reset are not supported
6. If you don't see modules after updating Firmware then restart AgtN2XUSBManagerService & AgtN2XResourceManager.
7. Windows 7 support added (for Enterprise & Professional 32bit OS only)
   - Run the installer exe in Administrator Mode
   - User Account control Settings should be "Never notify"
8. The location of the OpenE script has been changed from 'C:\AgilentPciExpress' to
   <Exerciser Install Folder>\8.2 Release\Samples\PCIe Port.
9. When PCIe Spec Revision is set to 0.9, only the TS packets are 0.9 compliant in this release.
_______________________________________________________________________________